济南厂房福音！大跨距桥架破解3大痛点，加强筋加，安装省一半钱

　　Jinan factory gospel! Cracking 3 major pain points for large-span bridge frames, adding free reinforcing bars, and saving half of the installation cost

　　在济南做厂房、车间工程的朋友，几乎都被电缆桥架安装难住过：厂房宽度大，动辄十几米、几十米，用常规2米桥架拼接，接头一大堆，不仅安装麻烦，还存在极大隐患，稍微承重不均就容易变形、脱落；更头疼的是，安装成本居高不下，人工+材料算下来，每米成本比预想的高出不少，想省成本又怕不，陷入两难。今天就给济南工程人、厂房老板们，一个解决方案——济南大跨距电缆桥架，做加强筋处理，不用多花一分钱，还能随意定制尺寸、材质，彻底破解成本高、连接不、适配性差的三大痛点，用大白话+实打实的数据，唠透它的优势，看完再也不用为桥架安装犯愁。

　　Friends who work in factories and workshops in Jinan have almost always found it difficult to install cable trays: the width of the factory building is large, often tens of meters or even tens of meters. Using conventional 2-meter cable trays for splicing and a large number of joints not only makes installation difficult, but also poses great safety hazards. Even slight uneven load-bearing can easily cause deformation and detachment; What's even more troublesome is that the installation cost remains high, and the cost per meter for labor and materials is much higher than expected. We are caught in a dilemma of wanting to save costs but fearing safety. Today, I would like to recommend a perfect solution to the engineers and factory owners in Jinan - Jinan large-span cable tray. We offer free reinforcement treatment, which allows you to customize the size and material without spending a penny. This completely solves the three major pain points of high cost, unsafe connection, and poor adaptability. With plain language and solid data, we will explain its advantages and no longer have to worry about the installation of the cable tray.

　　先给大家说个济南本地厂房的真实案例：章丘某大型机械厂房，宽度22米，初期计划用常规2米桥架拼接，算下来需要11节桥架、10个接头，不仅采购成本约8800元（按常规2米桥架80元/米计算），人工安装费还要4500元，总费用超1.3万元；而且多个接头拼接，监理验收时明确提出隐患，要求整改。后来换成济南大跨距桥架，定制6米长规格，仅需4节就能覆盖整个厂房宽度，接头减少70%，总采购+安装成本仅7600元，直接节省5400元，还一次性通过验收，后期运行也没有出现任何变形、松动问题。

　　First, let me give you a real case of a local factory in Jinan: a large mechanical factory in Zhangqiu, with a width of 22 meters, initially planned to use conventional 2-meter cable trays for splicing. After calculation, it requires 11 cable trays and 10 joints. The procurement cost is about 8800 yuan (calculated at 80 yuan/meter for conventional 2-meter cable trays), and the labor installation cost is also 4500 yuan, with a total cost of over 13000 yuan; Moreover, multiple joints are spliced together, and safety hazards are clearly identified during the supervision and acceptance, requiring rectification. Later, it was replaced with a large-span bridge in Jinan and customized to a length of 6 meters. Only 4 sections were needed to cover the entire width of the factory, reducing the number of joints by 70%. The total procurement and installation cost was only 7600 yuan, saving 5400 yuan directly. It also passed the acceptance inspection in one go, and there were no deformation or loosening problems during later operation.

　　先说说大家关心的痛点——2米桥架连接不，这也是济南厂房工程常遇到的隐患。常规2米桥架，每拼接一次就多一个接头，接头处的承重能力会下降30%以上，而济南厂房大多需要敷设重型电力电缆，每米电缆重量可达15-20kg，拼接处长期承重，很容易出现松动、变形，甚桥架脱落，引发电缆破损、短路等事故。据济南建筑行业统计，厂房桥架事故中，68%都是因为常规短跨距桥架拼接过多、接头松动导致的，每年因这类隐患整改的厂房超300家。

　　First, let's talk about the pain point that everyone is most concerned about - the unsafe connection of 2-meter bridge frames, which is also the most common hidden danger encountered in Jinan factory construction. Conventional 2-meter cable trays have an additional joint every time they are spliced, which reduces the load-bearing capacity of the joint by more than 30%. However, most factories in Jinan require the laying of heavy-duty power cables, with a weight of up to 15-20kg per meter. The long-term load-bearing capacity of splices can easily lead to loosening, deformation, and even bridge frame detachment, causing safety accidents such as cable damage and short circuits. According to statistics from the construction industry in Jinan, 68% of safety accidents in factory bridge frames are caused by excessive splicing and loose joints in conventional short span bridge frames. Over 300 factories are rectified annually due to such hidden dangers.

　　而济南大跨距电缆桥架，核心的优势就是“跨距大、连接少、更”，再加上加强筋处理，性直接拉满。它打破常规2米桥架的局限，可定制1-12米任意长度，其中3米、6米、8米是济南厂房常用的规格，占大跨距桥架市场用量的82%。比如20米宽的厂房，用6米长桥架，仅需4节就能完成敷设，接头数量比2米桥架减少60%以上，接头越少，隐患就越小，彻底解决拼接不的问题。

　　The core advantage of Jinan's large-span cable tray is that it has a large span, fewer connections, and is safer. In addition, with free reinforcement treatment, the safety can be directly increased. It breaks the limitations of conventional 2-meter cable trays and can be customized to any length of 1-12 meters. Among them, 3 meters, 6 meters, and 8 meters are the most commonly used specifications in Jinan factories, accounting for 82% of the market usage of large-span cable trays. For example, in a 20 meter wide factory building, a 6-meter long bridge can be laid in just 4 sections, reducing the number of joints by more than 60% compared to a 2-meter bridge. The fewer joints there are, the smaller the safety hazards, completely solving the problem of unsafe splicing.

　　强调：所有济南大跨距桥架，均做加强筋处理，不加任何额外费用！加强筋采用与桥架同材质的加厚板材，厚度≥2.0mm，间距≤50cm，均匀焊接在桥架底部和两侧，能让桥架的承重能力提升50%以上，常规6米长大跨距桥架，不加加强筋时每米承重120kg，加完加强筋后，每米承重可达180kg以上，即使敷设多根重型电缆，也不会变形、下垂，跨距8米时挠度≤L/400（L为跨距），完全符合国标要求，济南多数厂房、车间都能放心使用。

　　Key emphasis: All large-span bridge frames in Jinan are reinforced with reinforcement bars free of charge, without any additional fees! The reinforcing ribs are made of thickened plates of the same material as the bridge, with a thickness of ≥ 2.0mm and a spacing of ≤ 50cm. They are evenly welded at the bottom and both sides of the bridge, which can increase the load-bearing capacity of the bridge by more than 50%. For a conventional 6-meter long span bridge, the load-bearing capacity per meter is 120kg without reinforcing ribs. After adding reinforcing ribs, the load-bearing capacity per meter can reach more than 180kg. Even if multiple heavy-duty cables are laid, they will not deform or sag. The maximum deflection at a span of 8 meters is ≤ L/400 (L is the span), which fully meets the national standard requirements. Most factories and workshops in Jinan can use it with confidence.

　　再说说第二个核心痛点——安装成本高，济南大跨距桥架能帮大家省不少钱，这笔账咱们算得明明白白。是材料成本，常规2米桥架，加上接头、连接件，每米综合成本约80-100元，而济南大跨距桥架，定制6米规格，每米综合成本仅65-85元，比常规桥架每米节省15-25元，100米布线就能节省1500-2500元；其次是人工成本，常规2米桥架，每10米需要2名工人安装1天，人工成本约300元，而大跨距桥架接头少、安装快，每10米仅需1名工人安装1天，人工成本节省50%，100米布线可节省1500元以上。

　　Speaking of the second core pain point - high installation costs, Jinan's large-span bridge can help everyone save a lot of money, and we can calculate this account clearly. Firstly, there is the material cost. For a conventional 2-meter bridge, with the addition of joints and connectors, the overall cost per meter is about 80-100 yuan. However, for a large-span bridge in Jinan, with a customized 6-meter specification, the overall cost per meter is only 65-85 yuan, saving 15-25 yuan per meter compared to a conventional bridge. A 100 meter wiring can save 1500-2500 yuan; Secondly, there is the labor cost. For a conventional 2-meter bridge, 2 workers are required to install every 10 meters for 1 day, with a labor cost of about 300 yuan. However, for large-span bridge with fewer joints and faster installation, only 1 worker is needed to install every 10 meters for 1 day, saving 50% of labor costs. Wiring 100 meters can save more than 1500 yuan.

　　除此之外，济南大跨距桥架的适配性极强，彻底解决厂房宽度大、规格不匹配的问题。不管你的济南厂房宽度是10米、20米，还是30米，都能定制对应长度的桥架，1-12米随意选择，不用拼接或少拼接，既能适配不同宽度的厂房，又能减少后期维护成本——常规2米桥架接头多，每年维护接头需要花费不少人工，而大跨距桥架接头少，每年维护成本可节省60%以上，使用寿命也更长，常规桥架使用寿命约10-15年，大跨距桥架加加强筋后，使用寿命可达15-20年。

　　In addition, the adaptability of Jinan large-span bridge is extremely strong, completely solving the problem of large factory width and mismatched specifications. No matter if the width of your Jinan factory building is 10 meters, 20 meters, or 30 meters, you can customize the corresponding length of bridge frame. You can choose 1-12 meters freely without splicing or fewer splicing, which can adapt to different widths of factories and reduce maintenance costs in the later stage. Conventional 2-meter bridge frames have many joints, which require a lot of labor to maintain each joint every year, while large-span bridge frames have fewer joints, which can save more than 60% of annual maintenance costs and have a longer service life. The service life of conventional bridge frames is about 10-15 years, and after adding reinforcement to large-span bridge frames, the service life can reach 15-20 years.

　　材质方面，济南大跨距桥架也支持定制，不锈钢、镀锌、热浸锌等各种材质都能选，适配济南不同厂房环境，也很合理。其中热浸锌材质受济南厂房青睐，占比达65%，锌层厚度≥65μm，盐雾测试≥720小时，能抵御厂房内的粉尘、潮湿，每米约70-90元；不锈钢材质适配腐蚀性较强的厂房（比如化工、电镀厂房），每米约120-180元；镀锌材质性价比，每米约65-80元，适配普通机械、电子厂房，大家可根据自己的厂房场景灵活选择，均支持定制。

　　In terms of materials, Jinan large-span bridge also supports comprehensive customization, with various materials such as stainless steel, galvanized, hot-dip galvanized, etc. to choose from, suitable for different factory environments in Jinan, and the price is also very reasonable. Among them, hot-dip zinc material is most favored by Jinan factory buildings, accounting for 65%. The zinc layer thickness is ≥ 65 μ m, and the salt spray test is ≥ 720 hours. It can resist dust and moisture in the factory building, and the price per meter is about 70-90 yuan; Stainless steel material is suitable for factories with strong corrosiveness (such as chemical and electroplating factories), with a price of about 120-180 yuan per meter; Galvanized material has the highest cost-effectiveness, with a price of about 65-80 yuan per meter, suitable for ordinary mechanical and electronic factories. Everyone can flexibly choose according to their own factory scene, and all support free customization.

　　补充一组济南本地实用数据，帮大家参考：济南大跨距桥架，常规宽度50-1200mm、高度40-400mm，厚度1.5-3.0mm，定制周期仅3-5天，不耽误厂房施工工期；安装效率比常规2米桥架提升40%，100米布线，常规桥架需要5天完成，大跨距桥架仅需3天就能完成；后期电缆故障率可降低75%，检修效率提升50%，长期来看，能为济南厂房老板节省不少维护成本。

　　Add a set of local practical data in Jinan for reference: Jinan large-span bridge, with a conventional width of 50-1200mm, height of 40-400mm, thickness of 1.5-3.0mm, customization cycle of only 3-5 days, does not delay the construction period of the factory building; The installation efficiency is 40% higher than that of conventional 2-meter cable trays. For 100 meter wiring, conventional cable trays can be completed in 5 days, while large-span cable trays can be completed in only 3 days; The cable failure rate in the later stage can be reduced by 75%, and the maintenance efficiency can be improved by 50%. In the long run, it can save a lot of maintenance costs for the Jinan factory owner.

　　总结来说，济南大跨距电缆桥架，就是为解决厂房桥架安装痛点而生的——加加强筋，解决2米连接不的问题；1-12米随意定制，适配各种宽度的厂房；多种材质可选，性价比拉满，材料+人工双重省钱，安装更、使用更省心。不管你是济南章丘、高新区的机械厂房，还是长清、济阳的化工、电子厂房，只要遇到桥架安装成本高、厂房宽度大、连接不的问题，选济南大跨距桥架，就能一次性破解所有难题，花少的钱，做、省心的布线工程，有需求的朋友，可直接联系济南本地厂家，一对一定制适配方案～

　　In summary, the large-span cable tray in Jinan was designed to address the pain points in the installation of factory cable trays - by adding reinforcing bars to solve the problem of unsafe 2-meter connections; Customized 1-12 meters, suitable for factories of various widths; Multiple materials are available for selection, with full cost-effectiveness. The combination of materials and labor saves money, making installation more efficient and usage more worry free. No matter if you are a mechanical factory in Zhangqiu and High tech Zone of Jinan, or a chemical and electronic factory in Changqing and Jiyang, as long as you encounter problems such as high installation cost of cable trays, large width of the factory, and unsafe connections, choosing Jinan large-span cable trays can solve all problems at once, spend the least money, and do the safest and most worry free wiring engineering. Friends who have needs can directly contact local manufacturers in Jinan for a one-to-one customized adaptation solution