高压母线槽厂母线槽和桥架区别是什么
高压母线槽厂母线槽和桥架区别是什么
What is the difference between bus duct and Bridge in high voltage bus duct plant
,这两种产品,不是一个类别的.母线槽的作用与电缆一样,是传输电流的.桥架是一种支架,一般常见的就是电缆在桥架上敷设走线. 母线槽和桥架属于配套的关系. 母线槽自身无法敷设,需要桥架支撑固定。
First of all, these two products are not in the same category The function of bus duct is the same as that of cable, which is to transmit current Bridge is a kind of support. Generally, cables are laid and routed on the bridge Bus duct and Bridge belong to supporting relationship The bus duct cannot be laid by itself and needs to be supported and fixed by the bridge.
母线槽是电气产品,由金属板铝合金外壳或者钢外壳为保护外壳、铜或者铝质导电排、绝缘材料及有关附件组成的系统。它可制成标准长度的段节,并且每隔一段距离设有插接分线盒,也可制成中间不带分线盒的馈电型封闭式母线。为馈电和安装检修带来了很大的方便。
Bus duct is an electrical product. It is a system composed of metal plate, aluminum alloy shell or steel shell as protective shell, copper or aluminum conductive bar, insulating material and relevant accessories. It can be made into sections of standard length, and plug-in junction boxes are set at intervals. It can also be made into feed type enclosed bus without junction boxes in the middle. It brings great convenience for feeding, installation and maintenance.


母线槽和桥架区别是什么这是密集型母线槽电缆桥架材质有玻璃钢,钢,铝合金几种,主要是应对不同的使用环境.桥架是由托架、附件、支(吊)架三类部件构成的,支承电缆线路的具有连续刚性的结构系统。是使电线、电缆、管缆铺设达到标准化、系列化、通用化的电缆敷设装置,包括梯级式、托盘式、槽式、组合式4类,弯曲半径较大,可以有孔也可以无孔,可以半封闭也可以全封闭。线槽则是用来敷设电线或控制线、信号线的,弯曲半径比桥架小得多,并且是全封闭的。
What is the difference between bus duct and cable tray? This is a dense bus duct. Cable tray materials include FRP, steel and aluminum alloy, which are mainly used in different environments Bridge is a continuous rigid structural system composed of brackets, accessories and supports (hangers) to support cable lines. It is a cable laying device that makes the laying of wires, cables and pipes and cables standardized, serialized and universal, including step type, tray type, trough type and combined type. It has a large bending radius, can have holes or no holes, and can be semi closed or fully closed. The trunking is used to lay wires, control wires and signal wires. The bending radius is much smaller than that of the bridge, and it is fully enclosed.
上一篇:给电缆桥架表面进行处理的四种方法
下一篇:槽式电缆桥架与托盘式电桥架区别在哪里
下一篇:槽式电缆桥架与托盘式电桥架区别在哪里
相关文章 / Recommended news
- 山东电缆桥架选型封神指南!记住3句话,70%工程方避开选型陷阱不花冤枉钱
- 济南电缆桥架选型避坑!热浸锌vs不锈钢实测对比,70%工程方选错多花30%成本
- 山东电缆桥架厚度选型避坑!90%采购踩过薄料陷阱,5档标准精准适配不返工
- 济南电缆桥架采购陷阱:镀锌造假、尺寸偏差,安装全是坑!
- 山东电缆桥架:弱电工程中常用的几种桥架的区别,不要搞混 !
- 济南电缆桥架与支吊架深度辨析:功能差异与场景适配全指南
- 山东全封闭槽式桥架:防护与抗干扰双优的线缆敷设优选
- 济南电缆桥架验收8个必须要查看的注意事项
- 山东电缆桥架:电缆为何必走桥架?规范、与便捷缺一不可
- 济南电缆桥架:强弱电为何必须分开安装?电磁防护是关键
阳极氧化铝合金桥架
托盘式电缆桥架
梯式电缆桥架
梯式不锈钢电缆桥架
深灰色金属防火电缆桥架


