电缆桥架安装间距有具体要求吗?
电缆桥架的安装间距确实有具体的要求,以下是一些关键点:
The installation spacing of cable trays does have specific requirements, and the following are some key points:
多层敷设时的层间距离**:
Inter layer distance during multi-layer installation * *:
电力电缆桥架间不应小于0.3m。
The distance between power cable trays should not be less than 0.3m.
电信电缆与电力电缆桥架间不宜小于0.5m,当有屏蔽盖板时可减少到0.3m。
The distance between telecommunications cables and power cable trays should not be less than 0.5m, and can be reduced to 0.3m when there is a shielding cover plate.
控制电缆桥架间不应小于0.2m。
The distance between control cable trays should not be less than 0.2m.
桥架上部距顶棚、楼板或梁等障碍物不宜小于0.3m。
The distance between the upper part of the bridge and obstacles such as ceilings, floors, or beams should not be less than 0.3m.
电缆桥架水平安装时的支撑跨距**:
Support span for horizontal installation of cable tray * *:
一般为1.5~3m。

Generally, it is 1.5 to 3 meters.
电缆桥架垂直敷设时的固定点间距**:
The spacing between fixed points when laying cable trays vertically is * *:
不宜大于2m。
It should not be greater than 2m.
几组电缆桥架在同一高度平行安装时的净距**:
The clear distance between several sets of cable trays installed in parallel at the same height * *:
不小于0.6m。
Not less than 0.6m.
电缆桥架与用电设备交越时的净距**:
Clear distance between cable tray and electrical equipment crossing:
不小于0.5m。
Not less than 0.5m.
电缆桥架内缆线垂直敷设时的固定要求**:
Fixed requirements for vertical laying of cables in cable trays * *:
在缆线的上端和每间隔1.5米处应固定在桥架的支架上。
The upper end of the cable and every 1.5 meters should be fixed on the bracket of the bridge.
电缆桥架内缆线水平敷设时的固定要求**:
Fixed requirements for horizontal laying of cables in cable trays * *:
在缆线的首、尾、转弯及每间隔3~5米处进行固定。
Fix the cable at the beginning, end, turn, and every 3-5 meters.
在水平、垂直桥架和垂直线槽中敷设线时的绑扎要求**:
Binding requirements for laying wires in horizontal, vertical cable trays and vertical trunking:
对缆线进行绑扎,绑扎间距不宜大于1.5米。
Bind the cables with a spacing of no more than 1.5 meters.
这些规范确保了电缆桥架的正确安装和电缆的敷设,同时也考虑到了维护和散热的需求。在实际安装过程中,应严格遵守这些规定,以确保电缆桥架的和功能性。
These specifications ensure the correct installation of cable trays and the safe laying of cables, while also considering maintenance and heat dissipation needs. In the actual installation process, these regulations should be strictly followed to ensure the safety and functionality of cable trays.
本文由山东电缆桥架为您提供,我们的网站http://www.sdhangfeng.com我们将以全心全意的热情为您提供服务,欢迎您的访问
This article is provided by Shandong Cable Tray, our website http://www.sdhangfeng.com We will provide you with wholehearted enthusiasm and welcome your visit
下一篇:镀锌防火喷塑电缆桥架的特殊使用
相关文章 / Recommended news
- 济南电缆桥架选购指南:热镀锌与热浸锌一字之差,应用场景与天壤之别
- 山东工程人必看!桥架安装验收7大硬标准,少一项都要返工,附详细数据
- 济南厂房福音!大跨距桥架破解3大痛点,加强筋加,安装省一半钱
- 山东工程人警惕!桥架敷线踩这坑必返工,监理当场叫停,国标早有明确规定
- 济南人避坑!桥架≠线槽,90%工程人都搞混,一字之差差千里
- 避坑指南!山东电缆桥架规格别瞎选,偏大浪费偏小隐患大,国标早就定好了
- 济南人必看!铝合金电缆桥架选对厚度,耐用又省心,90%的人选错踩坑
- 山东人必看!电缆桥架不是“铁架子”,藏着建筑用电的密码,90%的人都不懂
- 800kg/m抗压!济南电缆桥架,破解3大工程痛点,工期省30%
- 3种类型+98%散热!山东电缆桥架,选对不踩坑,布线效率翻倍
阳极氧化铝合金桥架
托盘式电缆桥架
梯式电缆桥架
梯式不锈钢电缆桥架
深灰色金属防火电缆桥架


