网站公告-NOTICE

新闻资讯

当前位置:首页 / 新闻资讯

处理不锈钢电缆桥架外观的工艺介绍

当不锈钢电缆桥架不方便或因空间条件有特殊要求时,可选用柔性连接板和铰接板。弹性缝应设有弹性板;连接不同宽度和高度的托盘和梯子的两个部件可以作为加宽板或替换板来配备。但在施工过程中,应根据规划或工程布置条件选择支、吊架和桥梁。

When stainless steel cable trays are inconvenient or have special requirements due to space conditions, flexible connection plates and hinged plates can be used. Elastic joints should be equipped with elastic plates; The two components that connect trays and ladders of different widths and heights can be equipped as widening plates or replacement plates. However, during the construction process, supports, hangers, and bridges should be selected according to the planning or engineering layout conditions.

一般用于敷设高度柔性的计算机电缆、通信电缆、热电偶电缆等控制电缆。在腐蚀严重的环境下,对控制电缆起到良好的屏蔽和干扰作用,对电缆起到维护作用。

Generally used for laying highly flexible control cables such as computer cables, communication cables, thermocouple cables, etc. In environments with severe corrosion, it provides good shielding and interference for control cables, and serves as a maintenance tool for cables.

20180308041319131.png

不锈钢电缆桥架的宽度和高度由制造商根据以下要求选择:电缆在桥架中的填充率,电力电缆不应大于40%;控制电缆不应大于50%。将来应该为额外的电缆预留一些备用空间;所选托盘和桥梁标准的承载能力应满足要求。均匀载荷不应大于所选托盘和梯子载荷等级的额定均匀载荷。对于电缆桥架的设备,制造商选择需要屏蔽电气干扰的电缆线路。

The width and height of stainless steel cable trays shall be selected by the manufacturer according to the following requirements: the filling rate of cables in the tray shall not exceed 40% for power cables; Control cables should not exceed 50%. In the future, some spare space should be reserved for additional cables; The load-bearing capacity of the selected pallets and bridge standards should meet the requirements. The uniform load should not exceed the rated uniform load of the selected pallet and ladder load level. For cable tray equipment, manufacturers choose cable lines that need to be shielded from electrical interference.

有腐蚀性和易燃粉尘的地方应使用没有盖子和孔的封闭托盘。当电缆桥架需要根据当地情况调整方向时,应使用组装好的托盘或带孔和梯子的托盘。灰尘简单堆积等需要隐藏的环境或室外场所应设置盖板。当低压电力线和控制线共用同一支架或梯形结构时,应选择中间有隔板的支架或梯形结构。分支处应提供适当的曲折,使托盘和梯架上下曲折;

Closed trays without covers and holes should be used in areas with corrosive and flammable dust. When cable trays need to be adjusted according to local conditions, assembled trays or trays with holes and ladders should be used. Cover plates should be installed in environments or outdoor areas that require concealment, such as simple accumulation of dust. When low-voltage power lines and control lines share the same bracket or trapezoidal structure, a bracket or trapezoidal structure with a partition in the middle should be selected. Appropriate twists and turns should be provided at the branch to allow the trays and ladders to twist up and down;

电缆桥架厂家在处理电缆桥架外观工艺时,有必要更加关注电缆的分布环境。电缆分配环境的可用性丰富。有许多模型可以应用于许多不同的电气环境。电缆桥架外形美观,设备灵活,易于维护。因为使用量大,所以种类也不一样。通过一些的技术,可以更好地保证输电线路中桥梁。

It is necessary for cable tray manufacturers to pay more attention to the distribution environment of cables when dealing with the appearance process of cable trays. The availability of cable distribution environment is abundant. There are many models that can be applied to many different electrical environments. The cable tray has a beautiful appearance, flexible equipment, and is easy to maintain. Due to its high usage, the types are also different. Through some advanced technologies, bridges in transmission lines can be better ensured.

本文由山东电缆桥架提供技术支持,更多的详细精彩内容请点击我们的网站   http://www.sdhangfeng.com我们将会全心全意为您提供满意的服务。

This article is supported by Shandong cable tray technology. For more detailed and exciting content, please click on our website http://www.sdhangfeng.com We will wholeheartedly provide you with satisfactory service.

 
qq
售前咨询热线
15168870138
售后咨询热线
13465410318