In today's social life, I believe most of my friends have a certain understanding of cable tray. Generally speaking, when it is parallel to or interpenetrating with other pipes, the distance of galvanized cable tray shall comply with relevant regulations. What are the methods to correctly use galvanized cable tray?

镀锌电缆桥架是利用电解设备将电缆桥架放入脱脂、酸洗后的锌盐溶液中，并与电解设备的负连接。锌板放置在电缆桥架的对面，与电解设备的正连接，并与电源连接。通过电流从正向负的方向运动，会在电缆桥架上沉积一层锌，镀锌电缆桥架先经过加工再镀锌，起到防腐的作用。

Galvanized cable tray is the negative connection between the cable tray and the electrolytic equipment by putting the cable tray into the zinc salt solution after degreasing and pickling. The zinc plate is placed opposite the cable tray, directly connected to the electrolytic equipment and connected to the power supply. If the current moves from positive to negative direction, a layer of zinc will be deposited on the cable tray. The galvanized cable tray will be processed first and then galvanized to prevent corrosion.

正确使用镀锌电缆桥架的方法有哪些?

What are the methods to correctly use galvanized cable tray?

电缆桥架不宜安装在有化学腐蚀或热力管道的气体管道上方或有高腐蚀的液体管道下方。如果一定要做的话，就要做好防腐保温工作。电缆桥架内的电缆应按以下部位进行固定。

The cable tray shall not be installed above the gas pipeline with chemical corrosion or thermal pipeline or below the liquid pipeline with high corrosion. If it must be done, it is necessary to do a good job in anti-corrosion and thermal insulation. The cables in the cable tray shall be fixed according to the following parts.

由于电缆桥架需要长时间暴露在露天中，电缆桥架的表面需要进行镀锌加固，所以也叫镀锌电缆桥架。经过镀锌后，整个电缆桥架的寿命大大延长，这基本上是由于镀锌工艺。

Because the cable tray needs to be exposed to the open air for a long time, the surface of the cable tray needs to be galvanized and reinforced, so it is also called galvanized cable tray. After galvanizing, the service life of the whole cable tray is greatly prolonged, which is basically due to the galvanizing process.

一般来说，镀锌电缆桥架分为热镀和冷镀两种，两种镀锌方法各有优缺点。一般来说，热浸镀是在户外使用的，因为热浸镀工艺可以在很大程度上提高抗能力，这样在户外工作的时候，就可以应对雨水、高温等恶劣的环境。冷镀经常在室内使用，冷镀可以提高表面的亮度，使外观更加明亮美观。

Generally speaking, galvanized cable tray is divided into hot plating and cold plating. The two galvanizing methods have their own advantages and disadvantages. Generally speaking, hot-dip galvanizing is used outdoors, because the hot-dip galvanizing process can greatly improve the anti-corrosion ability, so that when working outdoors, it can deal with harsh environments such as rain and high temperature. Cold plating is often used indoors. Cold plating can improve the brightness of the surface and make the appearance brighter and beautiful.

以上就是济南电缆桥架http://www.sdhangfeng.com为大家介绍的内容，感谢您在百忙之中查看我公司的信息内容，如果您想要了解的更多，欢迎您来电进行咨询!

The above is Jinan cable tray http://www.sdhangfeng.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!