What are the accessories of Shandong cable bridge? Below, Shandong cable bridge manufacturer will introduce to you the common accessories: tee, elbow, reducer, screw, buckle lock, supporting arm, suspender, cross arm, low seat, connecting piece and grounding wire.

电缆桥架的主要部件:电缆桥架安装时的支托，是通过立柱和托臂来完成的。

Main components of cable tray: the support during cable tray installation is completed through column and support arm.

立柱是支撑电缆桥架的主要部件，而电缆桥架的荷重是通过托臂传递给立柱的。

The column is the main component supporting the cable tray, and the load of the cable tray is transmitted to the column through the bracket.

因此立柱和托臂是电缆桥架安装的两个主要部件。

Therefore, the column and bracket are the two main components for the installation of cable tray.

电缆桥架配件在各行各业中的用途：护罩与连接件本部分主要是梯级式、托盘式、槽式桥架配件，它包括调宽片、调高片、连接片、调角片、隔板护罩等。

Application of cable tray accessories in all walks of life: shield and connector this part is mainly ladder type, tray type and trough type bridge accessories, which includes width adjusting piece, height adjusting piece, connecting piece, angle adjusting piece, diaphragm shield, etc.

它是电缆桥架安装中的变宽、变高、连接，水平和垂直走向中的小角度转向，动力电缆与控制电缆的分隔等需要的附件。

It is an accessory required for widening, heightening and connection in cable tray installation, small angle steering in horizontal and vertical direction, separation of power cable and control cable, etc.

电缆桥架配件是电缆桥架中十分重要的部分。这样的话对它的要求是十分严格的，因为是需要应用到一些比较重要的领域中去。

Cable tray accessories are a very important part of cable tray. In this case, the requirements for it are very strict, because it needs to be applied to some important fields.

主要包括各种电缆、管缆卡子和连接、紧固螺栓等一些桥架配件，所有连接、紧固螺栓电缆卡子全部镀锌，其它槽板、花孔角铁表面处理分有静电喷塑、镀锌、喷漆三种。

It mainly includes various cables, pipe and cable clips and some bridge accessories such as connecting and fastening bolts. All connecting and fastening bolts and cable clips are galvanized. The surface treatment of other trough plates and perforated angle iron includes electrostatic plastic spraying, galvanizing and painting.

按膨胀螺栓规格先用ZIC2-22型电陲（冲击电钻）钻孔，然后插入膨胀螺栓。装上工件，旋紧螺母。

According to the specification of expansion bolt, first drill with zic2-22 electric drill (impact electric drill), and then insert the expansion bolt. Install the workpiece and tighten the nut.

电缆桥架配件总体上的介绍：

General introduction of cable tray accessories:

电缆桥架系指电缆梯架、电缆托盘及金属线槽。

Cable tray refers to cable ladder, cable tray and metal trunking.

电缆桥架主要有钢制、铝合金制及玻璃钢制等。

Cable trays are mainly made of steel, aluminum alloy and FRP.

钢制桥架配件表面处理分为喷漆、喷塑、电镀锌，热镀锌、粉沫静电喷涂等工艺。

The surface treatment of steel bridge accessories is divided into painting, plastic spraying, electro galvanizing, hot galvanizing, powder electrostatic spraying and other processes.

电缆桥架的安装主要有沿顶板安装。沿墙水平和垂直安装、沿竖井安装、沿地面安装。

The cable tray is mainly installed along the top plate. Install horizontally and vertically along the wall, along the shaft, and along the ground.

沿电缆沟及管道支架安装等。安装所用支（吊）架可选用成品或自制。支（吊）架的固定方式主要有预埋铁件上焊接，膨胀螺栓固定等。

Installation along cable trench and pipe support, etc. The support (hanger) used for installation can be finished products or self-made. The fixing methods of support (hanger) mainly include welding on embedded iron parts, expansion bolt fixing, etc.

以上内容就是山东电缆桥架厂家给大家讲解的电缆桥架附件有哪些想必大家看完以上内容又了解了不少希望在以后在购买的过程中能给大家带来帮助。

The above content is what the cable tray accessories explained by Shandong cable tray manufacturer to you. I think you have learned a lot after reading the above content. I hope it can help you in the purchase process in the future.