The bridging cable tray stone is suitable for cables. It has been widely used in industrial production, making the cable tray play a stronger role in metal surface treatment. It is necessary for people here to detail the key points of Shandong cable tray process, and we hope to help you.

　　1、电缆桥架的类型很多，不同类型的表面处理工艺对于以上规定都不相同，所以在发展表面处理工艺时一定要注意对实际问题进行深入分析，选择合适的工艺。

　　1. There are many types of cable tray, and different types of surface treatment processes have different requirements for the above. Therefore, when developing the surface treatment process, we must pay attention to the in-depth analysis of the actual problems and select the appropriate process.

　　2、在开发曲面解决方案时，在需求融合其实际应用时进行，充分考虑柔性设备的规定，使在应用时更加方便。

　　2. In the development of curved surface solutions, it is carried out when the requirements are integrated into its practical application, and the provisions of flexible equipment are fully considered to make the application more convenient.

　　3、电缆桥架表面处理过程中必须注意电缆配电设备在自然环境中,当时的电缆功效尤为重要,更能衬托的强项和高压电缆,表面处理技术在时分是关键,如果这是更多的优势,也可以获得更好的应用效果。

　　3. In the process of cable bridge surface treatment, attention must be paid to the cable distribution equipment in the natural environment. At that time, the cable efficiency is particularly important, and the strength and high-voltage cable can be more set off. The surface treatment technology is the key in the time, if this is more advantage, it can also obtain better application effect.

　　4,表面进行解决方案的需求在很好的充分考虑实际施工过渡的整个过程及其系统的水平,所有项目不仅是简单的整体规划和建设,很多不同的需求层次的知识支持,商品表面的解决必须重视这个级别的时候,我们已经应用于一个巨大的进步。

　　4. The demand for surface solution is well considered in the whole process of actual construction transition and the level of the system. All projects are not only simple overall planning and construction, but also supported by many different levels of professional knowledge. We have applied it to a huge progress when the level of commodity surface solution must be emphasized.

　　在整个安装过程中，禁止载客。如果现场情况确定有必要，有防范措施的设备可以搭载乘客。对于点焊必须在防腐溶液中做好焊接工作，一般由客户在现场刷防腐漆。

　　During the whole installation process, it is forbidden to carry passengers. If it is necessary to determine the site conditions, the equipment with safety precautions can carry passengers. For spot welding, the welding must be done well in the anti-corrosion solution. Generally, the customer will brush the anti-corrosion paint on the site.

　　电缆桥架敷设时，桥跨节点与支承板点之间的距离应在桥跨的1/4范围内。对于大跨度桥梁框架，应尽量与支承板相连接。在有弯道或三通的区域，支撑板的点应单独提起。

　　When laying the cable bridge, the distance between the bridge span node and the supporting plate point shall be within 1 / 4 of the bridge span. For long-span bridge frame, it should be connected with supporting plate as much as possible. In areas with bends or tees, the points of the support plate shall be lifted separately.

　　山东电缆桥架内的电缆由电缆带或金属电缆卡环固定。对于水平铺装的电缆一般每2m上下设一个支撑点;垂直铺装电缆每1-1.5m固定一次，设计标高变化时，梁端固定一次。

　　The cable in Shandong cable tray is fixed by cable belt or metal cable snap ring. Generally, a support point shall be set up every 2m for cables paved horizontally; cables paved vertically shall be fixed once every 1-1.5m; when the design elevation changes, the beam end shall be fixed once.