What are the accessories of Shandong cable bridge? Below, Shandong cable bridge manufacturer will introduce to you the common accessories: tee, elbow, reducer, screw, buckle lock, supporting arm, suspender, cross arm, low seat, connecting piece and grounding wire.
Main components of cable tray: the support during cable tray installation is completed through column and support arm.
The column is the main component supporting the cable tray, and the load of the cable tray is transmitted to the column through the bracket.
Therefore, the column and bracket are the two main components for the installation of cable tray.
Application of cable tray accessories in all walks of life: shield and connector this part is mainly ladder type, tray type and trough type bridge accessories, which includes width adjusting piece, height adjusting piece, connecting piece, angle adjusting piece, diaphragm shield, etc.
It is an accessory required for widening, heightening and connection in cable tray installation, small angle steering in horizontal and vertical direction, separation of power cable and control cable, etc.
Cable tray accessories are a very important part of cable tray. In this case, the requirements for it are very strict, because it needs to be applied to some important fields.
It mainly includes various cables, pipe and cable clips and some bridge accessories such as connecting and fastening bolts. All connecting and fastening bolts and cable clips are galvanized. The surface treatment of other trough plates and perforated angle iron includes electrostatic plastic spraying, galvanizing and painting.
According to the specification of expansion bolt, first drill with zic2-22 electric drill (impact electric drill), and then insert the expansion bolt. Install the workpiece and tighten the nut.
General introduction of cable tray accessories:
Cable tray refers to cable ladder, cable tray and metal trunking.
Cable trays are mainly made of steel, aluminum alloy and FRP.
The surface treatment of steel bridge accessories is divided into painting, plastic spraying, electro galvanizing, hot galvanizing, powder electrostatic spraying and other processes.
The cable tray is mainly installed along the top plate. Install horizontally and vertically along the wall, along the shaft, and along the ground.
Installation along cable trench and pipe support, etc. The support (hanger) used for installation can be finished products or self-made. The fixing methods of support (hanger) mainly include welding on embedded iron parts, expansion bolt fixing, etc.
The above content is what the cable tray accessories explained by Shandong cable tray manufacturer to you. I think you have learned a lot after reading the above content. I hope it can help you in the purchase process in the future.