Jinan cable bridge is more and more widely used in electrical engineering or construction. Therefore, installation is a problem. We need to pay attention to the stability of the bridge. In installation, a bridge is related to many factors. The same bridge is stable, and the quality is affected by many factors. Today, how do we solve the problem of cable tray stability.
Cable tray is mainly used for power transmission stage, cable and optical fiber support, protection and management. When the amount of cable and fiber wiring is large, it is easy to sag, so the technical personnel thought of using metal materials as pipe gallery to protect the fiber and cable. However, the maintenance of traditional closed pipelines is complex and expensive. Therefore, open bridge is more and more popular in data and IDC room.
1. Pay attention to positioning and setting out before installation of Jinan cable bridge, determine the position according to the construction drawing, and draw horizontal and vertical lines at the same time. Next, fix the accessories, screws and expansion wires to fix the bridge. The next step is to adjust the bridge to make it stable in the design position and completely fixed.
2. Different directions should be provided for the passive cable line design of bridges. Among them, the cables in weak current system should be arranged by categories, because this is a better route and installation, which meets the requirements of the trend, combined with the actual structure and the location of air conditioning, etc.
Jinan cable bridge
3. The reason why the bridge frame is concerned is that its design structure is simple, the installation threshold is low, and the maintenance cost is high. It is convenient for cleaning and testing, and can adapt to various complex and harsh environments. When selecting the bridge, it is necessary to select the bridge suitable for itself and pay attention to the installation steps.
4. The active and passive cables cannot be laid side by side, and the conditions are limited. If they are in the same bridge shop, they need to use metal plates to set them in the middle, which leads to cables to avoid cross plane. The bridge passing through the floor or expansion joint should be left in the framework drawing and corresponding position to avoid temporary drilling in the construction, because it will damage the civil structure in the bridge design, In order to prevent the interference of electromagnetic radiation, the sealing of bridge should be considered.
The above is the related content about the factors that affect the stability of Jinan cable bridge. The bridge stability and engineering must choose good bridge products, from the foundation to avoid future problems.