Cable tray is one of the main products of our company. How to choose the most appropriate process for cable tray assembly and welding? Now, Shandong cable tray small series will introduce how to choose the appropriate process for cable tray assembly welding, let's learn about it.
1. Bridge assembly datum
In order to ensure the normal operation of the bridge after wheel installation, four groups of bending plates shall be on the same plane. They shall be assembled on the same horizontal plane, which is the basis for adjusting all parts of the bridge body. Through the lifting hole of the upper cover plate of the end beam, a T-shaped ruler can be set and adjusted with a liquid level gauge.
2. Cushion position selection
Due to the influence of self weight on the main beam arch, the main beam support should be located near the main beam span. In the final measurement and adjustment process, the bridge with small lifting capacity shall be padded at the end beam as far as possible.
3. Selection of operation site
As long as there is a temperature difference in the main beam, there will be arch (warping) or horizontal bending (side bending) changes. Bridge tests shall be carried out in the morning, evening or at night.
4. In order to reduce the overall welding deformation of the bridge, weld the welds of all components before assembly, and do not wait until the completion of assembly before welding repair.
The above is how to choose the right welding process for Shandong cable tray assembly introduced by Xiaobian. We adhere to the concept of "serving customers and creating value", provide customers with high-quality products and perfect services, and choose us as your most correct choice, looking forward to our cooperation.