The advantages and application of open type cable tray, the following small for you to explain:
First of all, the open grid cable tray all cable Gengen visible, can the quality of comprehensive control wiring project, after the event of failure, can quickly identify problems and take corresponding measures to cable;
Second, open the tray allows the wire from any point, can be very convenient and cabinet, rack connected, and can arbitrarily change the outlet point; ordinary slot must be at the outlet point drilling, and not change;
Third, open type cable tray in the machine room use is very convenient, because the room in the movement of the cable, or change very frequently, and often upgrade and expansion. If you are using trough, two bridge connection place, each interface at least 8 screws nuts, more than 16, in order to make any changes must first put the screw nut, remove the cover; after the modification must be installed back cover. Kabofi grid cable tray is structure completely open, all kinds of changes can be directly used for cable. Go to the factory use special custom slot and a big trouble is all kinds of elbow, three links, four links, reducing the elevation changes and so on the transition part of the need to carefully measure, and all of these are part of the transition at the site directly cut into, any one of the installation workers through a simple training to ten minutes master cutting method.
Welcome to call for more product information, sincerely look forward to your choice of our products, we believe that the quality of our products will make you satisfied.