网站公告-NOTICE

网站公告

当前位置:首页 / 网站公告 /

安装大跨距电缆桥架要做隔热措施

  如果安装场所为具有腐蚀性或者是非常潮湿的环境,那么在布线时就必须要根据腐蚀介质的不同来采取相应的防护措施。
  If the installation site is corrosive or humid, then the corresponding protective measures must be taken according to the different corrosive media when wiring.
  在大跨距电缆桥架上时可以进行无间距敷设电缆的,电力电缆在桥架内的横断面填充率要在40%以下,而控制电缆则应小于桥架横断面积的一半。
  The cable can be laid on the long span cable bridge. The filling rate of the power cable in the bridge frame should be less than 40%, while the control cable should be less than half of the cross section area of the bridge.
  若是将几组电缆桥架同时在同一高度进行平整安装的时候,就需要考虑各组电缆桥架之间的维护和检修距离。
济南电缆桥架
  If several groups of cable bridges are leveled at the same height at the same height, the maintenance and maintenance distance between the various cable bridges should be taken into account.
  安装大跨距电缆桥架的时候不能安装在具有腐蚀性气体管道以及热力管道的上方,在腐蚀性液体管道的下方也不能直接安装电缆桥架,若是必须如此的话则应做好防护和隔热措施。
  When installing long span cable bridge, it cannot be installed on the top of corrosive gas pipeline and heating pipe. Under the corrosive liquid pipe, the cable bridge can not be directly installed. If necessary, protection and insulation measures should be well done.
  本文的精彩内容来自济南电缆桥架详细内容请点击我们的官方网站:http://www.sdhangfeng.com/谢谢您的到来!
  The wonderful content of this article comes from the details of the cable bridge in Ji'nan. Please click on our official website: http://www.sdhangfeng.com/ thank you for your arrival.
 
qq
QQ在线咨询
售前咨询热线
15168870138
售后咨询热线
13465410318