网站公告-NOTICE

网站公告

当前位置:首页 / 网站公告 /

确定电缆桥架宽度的勾股定理

  1、济南电缆桥架作为布线工程的一个配套项目,目前尚无专门的规范指导,个生产厂家的规格程式缺乏通用性,因此,设计选型过程应根据弱电各个系统缆显得类型、数量,合理选定适用的桥架。

  1, cable tray as a wiring project supporting the project, at present there is no special instruction, the manufacturer's specifications programs lack of generality, therefore, the design selection process should appear type and quantity of each system according to the weak cable, reasonable selection of suitable bridge.

  (1)确定方向:根据建筑平面布置图,结合空调管线和电气管线等设置情况、方便维修,以及电缆路由的疏密来确定电缆桥架的佳路由。在室内,尽可能沿建筑物的墙、柱、梁及楼板架设,如许利用综合管廊架设时,则应在管道一侧或上方平行架设,并考虑引下线和分支线尽量避免交叉,如无其它管架借用,则需自设立(支)柱。

  (1) determine the direction: according to the building floor plan, combined with air conditioning pipelines and electrical pipelines and other settings, convenient maintenance, as well as the density of cable routing to determine the best route cable bridge. In the room, as far as possible along the walls of the building, columns, beams and floor erection, so the comprehensive utilization of pipe rack erection, should be set up in parallel side or above the pipeline, and consider the lead line and a branch line to avoid cross, such as no other pipe frame borrowing, is required since the establishment (Branch) column.

  (2)荷载计算:计算电缆桥架主干线纵断面上单位长度的电缆重量。

  (2) load calculation: calculate the weight of the unit length on the longitudinal section of the cable bridge main frame.
济南电缆桥架生产厂家

  (3)确定桥架的宽度:根据布放电缆条数、电缆直径及电缆的间距来确定电缆桥架的型号、规格, 托臂的长度,支柱的长度、间距,桥架的宽度和层数。

  (3) to determine the width of the bridge cable laying: according to the number and diameter of the cable and cable spacing to determine the type and size of the cable tray, arm length, strut length, spacing, bridge width and number.

  (4)确定安装方式:根据场所的设置条件确定桥架的固定方式,选择悬吊式、直立式、侧壁式或是混合式,连接件和紧固件一般是配套供应的,此外,根据桥架结构选折相应的盖板。

  (4) determine the installation: according to the fixed place conditions to determine the bridge, suspensory, upright, side wall or mixed type, connectors and fasteners are generally supporting the supply, in addition, according to the bridge structure, choose the corresponding cover.

  (5)绘出电缆桥架平、剖面图,局部部位还应绘出空间图,开列材料表。

  (5) draw a flat section of the cable bridge, and draw a space map as well as a material list for the local part.

  本文由济南电缆桥架为您提供,我们的网站是:http://www.sdhangfeng.com/我们将以全心全意的热情为您提供更优质的服务,欢迎您的访问!

  This article by the Ji'nan cable bridge provides for you, our website is: http://www.sdhangfeng.com/, we will wholeheartedly wholeheartedly provide you with better service, you are welcome to visit!

 
qq
QQ在线咨询
售前咨询热线
15168870138
售后咨询热线
13465410318